Aircraft Lights Manager
Main light controller for the aircraft. All the lights are controlled from here.
Supported light types are:
- Landing Lights - beam lights lighting up the runway on approach.
- Strobe Navigation Lights - strong beacons that flash periodically.
- Constant Navigation Lights - lights with constant output indicating aircraft position and travel direction, usually red and green.
Strobe and constant navigation lights are toggled using the same keyboard key since they are normally on at the same time.
Each group can have multiple lights and they can be any type of Light
or a Mesh
can be used with Emission
turned on. More about this in the LightSource
section.
Light Source
One vehicle light source. Can be a Light
or emissive Mesh
.
- If
Light
is selected asType
any UnityLight
can be assigned. It will be turned on and off according to user input. - If
Mesh
is selected asType
anyMesh
withStandard
shader can be used. It'sEmission
field will be toggled to imitate a working light. Since this does not emit enough light to be a headlight usually another light source is used in tandem, this one withSpotLight
assigned.
For an emissive mesh light to work it needs to be a separate object. If the model does not come with lights and blinkers as separate objects these will need to be separated in 3D modelling software such as Blender (free, open source).
When using Mesh
light source make sure to tick the Emission
checkbox on the material. This lets Unity know that this variant of the material is in use and should be included in the build.